1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

//! Default values used in net_report.

/// The default STUN port used by the Relay server.
///
/// The STUN port as defined by [RFC 8489](<https://www.rfc-editor.org/rfc/rfc8489#section-18.6>)
pub const DEFAULT_STUN_PORT: u16 = 3478;

/// Contains all timeouts that we use in `iroh-net_report`.
pub(crate) mod timeouts {
    use std::time::Duration;

    // Timeouts for net_report

    /// The maximum amount of time net_report will spend gathering a single report.
    pub(crate) const OVERALL_REPORT_TIMEOUT: Duration = Duration::from_secs(5);

    /// The total time we wait for all the probes.
    ///
    /// This includes the STUN, ICMP and HTTPS probes, which will all
    /// start at different times based on the ProbePlan.
    pub(crate) const PROBES_TIMEOUT: Duration = Duration::from_secs(3);

    /// How long to await for a captive-portal result.
    ///
    /// This delay is chosen so it starts after good-working STUN probes
    /// would have finished, but not too long so the delay is bearable if
    /// STUN is blocked.
    pub(crate) const CAPTIVE_PORTAL_DELAY: Duration = Duration::from_millis(200);

    /// Timeout for captive portal checks
    ///
    /// Must be lower than [`OVERALL_REPORT_TIMEOUT`] minus
    /// [`CAPTIVE_PORTAL_DELAY`].
    pub(crate) const CAPTIVE_PORTAL_TIMEOUT: Duration = Duration::from_secs(2);

    pub(crate) const DNS_TIMEOUT: Duration = Duration::from_secs(3);

    /// The amount of time we wait for a hairpinned packet to come back.
    pub(crate) const HAIRPIN_CHECK_TIMEOUT: Duration = Duration::from_millis(100);

    /// Default Pinger timeout
    pub(crate) const DEFAULT_PINGER_TIMEOUT: Duration = Duration::from_secs(5);
}